How to Upgrade SHAFTALIGN - ALI 21.210 computer

1) Extract executable file to empty USB memory stick. Firmware will be stored in the SHAFTALIGN folder.
2) Attach ALI 21.503 USB cable
3) Connect PRUFTECHNIK memory stick to the USB cable.
4) Switch on SHAFTALIGN. It will recognize the attached memory stick and will autostart.
5) Follow the instructions at the end of the upgrade process.
Warning: Ensure that the device is charged or at least 50% battery capacity.

Firmware version 1.12 Build 2112
SHAFTALIGN-FW1.12.exe

Version Notes 

SHAFTALIGN FW 1.12 (Build 2112) including Sensor FW 1.42

• What's new

SHAFTALIGN FW 1.10 (Build 1226)

• Workflow improved: When returning to DIM screen with auto-flow enabled, last dimension position is selected
• Measure: Multipoint mode: Quick press of the '1' key enables inclinometer angle display (also in OPTALIGNsmart).
  Caution! A long press of the '1' key disables sensor firmware version auto check and opens dialog box to manually update sensor firmware.
• Static feet: After changing static foot selection, pressing Results key now accepts the changed static foot selection. 
• Move: Pressing M key to exit live move goes directly to measure screen after confirmation.
• Soft foot: Work flow optimised
• Soft foot: Long press of Left or Right navigation keys toggles L/R machine (on precondition that left machine has feet).
• Application details screen: Long press of the '1' key toggles between Feature key and License code display. 
• Battery status: Audible warning added for battery low status.

Go to Alignment Reporter